Velvety matte or preciously glossy

Ceramic Effect for all surfaces

Ceramic Effect is a highly pigmented paint you can use to transform surfaces and decorative elements into a fine matte ceramic look. If yo sand the object after drying, it becomes velvety matte. An additional treatment with Premium Clear Coat gives it a precious gloss.

  • water basedfor absorbent and non-absorbent surfaces
  • for absorbent and non-absorbent surfaces
  • Drying time per coat approx. 30 minutes, depending on coat thickness
  • high coverage
  • for stenciling
  • weather-proof

Ceramic Effect preparation: 
Stir well before use! Surfaces must be free of dust and grease.

Ceramic Effect processing: 
A first coat is dabbed on thinly, using a sponge. Let it dry for about half an hour. Thereafter, dab on a second thin coat and also let it dry.

Lightly sand the paint after drying to create a nice smooth surface. For stenciling, put down a stencil and spread the motif on with Ceramic Effect (using a spatula or brush). Remove and clean the stencil immediately.

Unevenness of the surface motif may be lightly sanded to smooth if needed.

You can treat the object further with other materials, such as Inka-Gold, Blackboard Lacquer. Ceramic Effect can be plastered, painted, spotted, or stenciled. It dries smudge-proof and is weather-resistant.

Tip: If you like it glossy, apply Premium Clear Coat to the dried object.

  • 100-weiss100-weiss
  • 905-holo905-holo

 

-->